VW Transporter T5–T6.1 12″ Subwoofer Enclosure / Sub Box

We offer custom sub enclosures designed specifically for VW Transporters, in 10” and 12” variants.

This listing for a standard height 12” sub enclosure.

If you have a RIB seat fitted, we offer LOW level enclosures designed to fit under the seat frame in our other listings.

This 12″ subwoofer enclosure is designed to fit neatly behind the rear wheel arch and is available for both nearside and offside installs. These fit all T5 to T6.1 models in both SWB and LWB formats.

Each box includes an audio connector and is built from 18mm moisture-resistant MDF with fully glued joins.

The enclosure fixes to the van wall through the sub cut-out, keeping all fixings hidden. There is a fitting video in tab below fro a 10″ bversion, the 12″ is similar fitment procedure. Fixings are supplied, but depending on your van’s panel setup, you may choose to drill fresh holes and use rivnuts—it’s up to you.

Please note: nearside fitting will require removal of the OEM jack mount point.

Please note: If you have a power sliding door motor you will need to notch the top panel of the enclosure to fit around the motor cover. It’s a simple mod that can be done with a handsaw, jigsaw, or router.

If you’re going DIY, we’ve got all the trim materials and adhesives available separately in our shop. Matching subs, amps, and fitting kits are also in stock if you’re after the full setup.

Images are for illustration purposes only and are intended to show general fitment location—they may not represent the exact model or spec for your van.

*Some images courtesy of Bognor Motors